EXTRQPERF SERVICES
Monday, February 27, 2017
EXTRQPERF SERVICES: How to Enable/Disable the On-Screen Keyboard in Wi...
EXTRQPERF SERVICES: How to Enable/Disable the On-Screen Keyboard in Wi...: The Windows 10 on-screen keyboard comes to your rescue when the physical keyboard stops responding. And while the on-screen keyboard is pa...
How to Enable/Disable the On-Screen Keyboard in Windows 10
The Windows 10 on-screen keyboard comes to your rescue when the physical keyboard stops responding. And while the on-screen keyboard is part of the built-in Ease of Access tools, its utility goes beyond the needs of the physically-challenged or the elderly.
You can use it to type on a Windows 10 touchscreen, or even use it with a game controller or a pointing device. The full-fledged keyboard comes with a numeric keypad you can use to enter numbers quickly.
3 Ways to Launch the On-Screen Keyboard
Method 1. Click on the Start button > Type OSK > Hit Enter.
Method 2. Go to Start. Select Settings > Ease of Access > Keyboard. Then toggle the slider under On-Screen Keyboard. A keyboard appears on the screen and it will remain on the screen until you close it.
Method 3.You can also open the OSK from the sign-in screen. Click on the Ease of Access button in the lower-right corner of the sign-in screen, and then select the On-Screen Keyboard.
Pin the keyboard to the taskbar if you plan to use it frequently.
Disabling the On-Screen Keyboard
You might want to disable the on-screen keyboard if it slows down your startup speed. Or you just don’t want to pop up when Windows boots to the desktop. It is easy to switch it off till you need it again.
Method 1. Again, go to Start, then select Settings > Ease of Access > Keyboard. Move the slider to Off.
Method 2. Press Windows + R to display the Run dialog box. Type regedit and then press Enter to open the Registry Editor. Expand the tree and go drill down to the following location: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > Authentication > LogonUI.
Open ShowTabletKeyboard and set the value to 1 to enable it. Set it to 0 to disable it. You can create a new key if it doesn’t exist by default.
Do avoid the Windows Registry if you are not sure about the process. The Ease of Access method is always preferable over rummaging in the registry.
There is also a basic touch keyboard that is available from the taskbar. But the On-Screen Keyboard is a far more advanced tool than the touch keyboard button for touch screens. For instance: Go into the Options and configure a few settings like text prediction or the numeric keypad.
You Never Know When You Might Need It
I recall my fractured hand and broken keys as two scenarios when the virtual keyboard came to my rescue. You might need it when keyboard drivers stop working or you need to remove the physical keyboard.
I also tried to combine the two features — Scan through Keys with Prediction — to speed up my typing.
What about you? Has the Windows 10 on-screen keyboard helped you when the mouse or the physical keys didn’t? Can Microsoft improve it more?
Wednesday, February 22, 2017
Windows 10 Taskbar Stops Auto-Hiding...How To Fix It.
One of the more common tweaks made to the Windows 10 taskbar involve changing it from always visible to auto-hidden, that way you can free up more screen space and only use the taskbar when you need it (it’ll show up when you hover your mouse over it).
But if you’re on Windows 10, there’s a rare and frustrating issue that may pop up when you use an auto-hidden taskbar: sometimes the auto-hide functionality will stop working for no reason, usually when some app enters fullscreen mode.

Did this fix your taskbar auto-hiding behavior? If you managed to fix it using another method, please let us know in the comments!
But if you’re on Windows 10, there’s a rare and frustrating issue that may pop up when you use an auto-hidden taskbar: sometimes the auto-hide functionality will stop working for no reason, usually when some app enters fullscreen mode.

If this is happening to you, there are a few solutions you can try.
Method 1: In Windows 10, the taskbar stops auto-hiding when an app needs your attention. Maybe you have unread messages in Skype, or maybe one of your downloads in Firefox finished, or perhaps your Postbox app ran into an error. Cycle through and make sure you have no new alerts!
Method 2: Open the Task Manager and navigate to the Processes tab, then find the process called Windows Explorer. Click on it, then click on the button labeled Restart. If the taskbar was temporarily glitched, this should fix it.
Method 3: If the taskbar is still being wonky, try unpinning all of your taskbar items before repinning them. It won’t always work, but you’d be surprised how often it does. I’m not really sure why it works, but it’s easy and harmless enough that you might as well try it.
Did this fix your taskbar auto-hiding behavior? If you managed to fix it using another method, please let us know in the comments!
Tuesday, February 7, 2017
Windows 10 Won’t Boot? Try This!
Few computer issues are quite as frustrating as a PC that refuses to boot up. When your system can’t even initialize, it’s difficult to make any headway in locating the source of the problem.
Of course, there’s no reason to despair. Even if things look bleak for your PC, you can try plenty of fixes before it’s truly beyond repair. Windows 10 offers several methods of sorting out the boot process, and there are a few easy techniques you can carry out for yourself.
With any luck, this guide should help find the culprit behind your computer’s unwillingness to boot.
1. Check Your Battery
If you’re using a laptop, battery issues could well be the source of your system’s inability to boot properly. It’s worth testing an alternate charger cable to see whether that’s causing the problem. Confirm that the cable is working by trying it out on another laptop. Next, remove your system’s battery and plug the device into a power source.
Removing the battery will help you discover which component is faulty, if a hardware problem is to blame. The key here is to ensure that you’re only testing one element at any given time. If power issues are preventing your computer from booting up, it’s crucial that you know whether the battery, the charging cable, or another component needs to be replaced.
2. Boot to the Command Prompt Interface
When your computer can’t boot properly, it really can’t do much at all. However, it might still be possible to boot directly to the command prompt to expand its range of abilities. Using this interface, you can perform more troubleshooting procedures, and perhaps even fix your problem outright. You’ll need to have Windows 10 on a bootable disk or USB drive to carry out the procedure, so use another computer to set that up before you get started.
To boot to the command prompt, start up your system. While it’s initializing, watch out for details of a combination of keys that will allow you to enter the BIOS. This information is typically delivered alongside the vendor logo.
Navigate to the Boot tab and make either the USB or DVD drive the first bootable device. Your choice here will depend on where your copy of Windows 10 is located. Again, the specifics of this process may vary from one system to another, so consult the on-screen instructions. Next, insert the disk or drive bearing Windows 10 into your system, save your configuration, and restart your PC.

When prompted, use your keyboard to specify that you want to boot using the disk or drive. Enter the requested language, currency, and input preferences, then select Repair your computer on the next screen. Next, select Troubleshoot > Advanced Options > Command Prompt, you should then see a window to enter commands.
3. Use System Restore or Startup Repair
If you’re already booting Windows 10 from a disk or drive, it’s well worth utilizing a couple of utilities that are available as part of the process. Once you’ve booted from the drive as detailed above, you’ll get access to options that can get your PC back on track. Look out for links to System Restore and Startup Repair on the Advanced Options screen.
System Restore is a utility that allows you to return to a previous restore point when your computer was working normally. It can remedy boot problems that were caused by a change you made, rather than a hardware failure.

Startup Repair is a general-purpose troubleshooter for issues that prevent Windows from starting up. If you’re struggling to find the source of your boot issues, it’s a good idea to run the utility in case it can find a solution.
4. Reassign Your Drive Letter
A system with more than one drive installed can cause boot issues for Windows 10 users if their operating system (OS) volume has its drive letter unintentionally unassigned. However, you can fix this problem with a minimum of fuss by booting to the command prompt interface.
Boot to a command prompt window as explained above, then enter the following to run the disk partition utility:
diskpart
Once this is done, input list volume to print details of all the volumes currently hooked up to your system.

From here, you can use the select and assign letter commands to reassign the correct letter to an unassigned volume. For instance, if I wanted to assign the letter E to the Audio CD volume in the above image, I would first input “select volume 0” and then input “assign letter=E” to complete the process.

As ever, be very careful when making changes in the command prompt. Making mistakes here can quickly cause further problems from your PC.
5. Dodge the Windows 10 Bootloader
If you run into problems while trying to make a fresh installation of Windows 10, you may encounter the new version of the bootloader utility. This can sometimes interfere with attempts to reach an existing OS installation that’s present on another drive.
Fortunately, there’s a relatively straightforward way to remedy this situation. Boot to the command prompt interface and enter the following:
bcdedit /set {default} bootmenupolicy legacy
Restart your computer, and you should find that the legacy bootloader interface has replaced the Windows 10 iteration. You should have no further problems entering Safe Mode, or accessing your existing OS installation.
6. Try a Third-Party Utility
Figuring out what exactly is the cause of the problem is the most challenging part of remedying boot issues. When your system can’t even boot, it’s difficult to diagnose the problem. However, a third-party utility called Boot Repair Disk might have more success.
Boot Repair Disk is an open source rescue disk that you can use to automatically find and fix issues preventing your PC from booting up. It’s very easy to use — you only have to select whether you’re using a 32-bit or 64-bit version of Windows. The following testing procedure and any required fixes are carried out automatically, although there are options that allow for more close control.
When you’re at your wit’s end with boot issues, and you’re not sure what to try next, Boot Repair Disk is a useful option. It’s not guaranteed to fix your PC, but it may well be able to pinpoint a problem that was previously hidden away.
Do you have tips for users unable to boot Windows 10? Contribute a solution, ask for help, or simply join the conversation in the comments section below!.
Thursday, February 2, 2017
Here’s How to Fix Black Screen at Boot
A black screen at boot is bad news. It’s tough to diagnose a problem without helpful information on the screen. After upgrading to Windows 10, many users found themselves looking at a black screen. Let’s look at how to solve it.
Follow our troubleshooting steps in order. Start with the basic checks, like ensuring the cables are connected and the monitor is turned on. Then proceed to more advanced solutions, like booting into Safe Mode to remove the display driver.
If you’ve encountered this problem and managed to overcome it, please share your story in the comments below.
1. Perform Basic Checks
If you’re not getting any picture at all, even when the system is first booting, the first thing you need to do is check the display connection. I know, you probably rolled your eyes at the suggestion, but do it anyway. Ensure the cable running from your monitor to your PC hasn’t come loose. Even if it hasn’t, switch the cable to a different video input and see if that solves it. Also, make sure the monitor is actually switched on.
If possible, connect your monitor to a different computer and see if it works there. If not, it can be a sign that the monitor is faulty and you should contact the manufacturer. Alternatively, you can try a different monitor on your computer. If that works, again, the other monitor may have a fault.
2. Unplug Your Devices
With your system on, disconnect all of your external devices. This includes your mouse, keyboard, external hard drive, and so on. Restart your computer and see if you still get the black screen. If you don’t, plug each device in one at a time until you find what’s causing the problem.
With the problematic device identified, try updating its drivers. No luck? Check out the device manufacturer’s support site and contact them for further help if needed.
3. Adjust Projection Settings
It may be that your system’s projection settings are set incorrectly. Press Windows key + P to bring up the Projection menu. From top to bottom the options are: PC screen only, Duplicate, Extend, and Second screen only. While the first is the default, consider that yours might not be set to it.
Press P to move the selection down the list and Enter to select. Repeat this four times to get back to the original setting, though hopefully one of the settings along the way will bring your display back.
4. Reinstall Display Drivers
To reinstall display drivers we’ll need to boot into Safe Mode. The method depends on various factors, so follow the appropriate steps below, then continue reading to find out how to reinstall your display drivers.
A. You Can See the Login Screen
Restart your computer. At the login screen, hold Shift, select the Power icon, and click Restart. Once restarted, select Troubleshoot > Advanced options > Startup settings > Restart. Again, your system will restart and present you with different options. Once restarted, press F5 to select Safe Mode with Networking. If that doesn’t work, follow the prior steps but select F3.
B. You Can’t See Anything and Have a Recovery Drive
If you have already created a recovery drive before this problem occurred, good job! Shut down your system and then connect the recovery drive. On the Choose an option screen, select Troubleshoot> Advanced Options > Startup Settings > Restart. Once restarted, press F5 to select Safe Mode with Networking. If that doesn’t work, follow the prior steps but select F3.
C. You Can’t See Anything and Don’t Have a Recovery Drive
You need access to a working computer so that you can create Windows 10 installation media. Download Windows 10 from Microsoft and then use this to create installation media. You then need to set the boot order in the BIOS to read your installation media first.
On the installation screen, select Repair your computer. Then select Troubleshoot > Advanced Options > Startup Settings > Restart. Once restarted, press F5 to select Safe Mode with Networking. If that doesn’t work, follow the prior steps but select F3.
How to Reinstall Your Display Drivers
Now you’re in Safe Mode, do a system search for device manager and select the relevant result. Expand the Display adapters option. Right-click the option within and select Properties. Go to the Driver tab.
If available, click Roll Back Driver…, select a reason, and click Yes. This will take you back to the previously installed driver. If this doesn’t work, or isn’t an option, select Uninstall to completely remove the driver.
You might experience some weirdness with this, like getting an incorrect resolution, but if it restores the monitor’s image then you’ve determined it’s a driver fault. If so, go to the manufacturer’s website and install an older driver or contact them for support.
Return From the Dark Side
Hopefully, working through these steps has solved your black screen problems, for advice on power supplies and overheating.
Have you suffered from a black screen on Windows 10? What did you do to resolve it?
Monday, January 30, 2017
CMD Commands to Manage (Wireless) Networks in Windows
As a Windows user, the Control Panel and the Settings app can feel quite limiting in what they can do. If you want full and absolute control over your network, meaning access to everything the operating system has to offer, then you’ll have to start using Command Prompt.
Never used Command Prompt before? Don’t worry. Using it is as simple as typing out the commands you’ll see below. It’s not hard at all and we’ll tell you everything you need to know to get started.
If you’re ready to continue, here are some of the most useful commands to know for managing and troubleshooting your home network.
1. PING
ping is one of the most basic yet useful commands you could know. It tells you whether your computer can reach some destination IP address or domain name, and if it can, how long it takes data to travel there and back again.
Sample usage and output:

The command works by sending out multiple data packets and seeing how many of them return. If some of them don’t return, it’ll tell you (“lost”). Packet loss leads to poor performance in games and streaming, and this is a nifty way to test.
By default it sends 4 packets, each one waiting 4 seconds before timing out. You can increase the number of packets like this:
ping www.google.com -n 10
And you can increase the timeout duration like this (value is in milliseconds):
ping www.google.com -w 6000
2. TRACERT
tracert stands for Trace Route. Like ping, it sends out a data packet as a way to troubleshoot any network issues you might have, but instead tracks the route of the packet as it hops from server to server.
Sample usage:

The command outputs a line-by-line summary of each hop, including the latency between you and that particular hop and the IP address of that hop (plus domain name if available).
Why do you see three latency readings per hop? Because tracert sends out three packets per hop, in case one of them gets lost or takes an inordinate amount of time that doesn’t represent your true latency. It’s best practice to average the three.
3. PATHPING
pathping is similar to tracert except more informative, which means it takes a lot longer to execute. After sending out packets from you to a given destination, it analyzes the route taken and computes packet loss on a per-hop basis.
Sample usage and output:

4. IPCONFIG
ipconfig may just be the most-used networking command on Windows. Not only is it useful for the information it provides, but you can combine it with a couple switches to execute certain tasks.
Sample usage and output:

The default output shows every network adapter on your system and how they resolve. The IPv4 Address and Default Gateway details under the Wireless LAN Adapter and Ethernet Adapter sections are the most important to know.
Use this switch to flush your DNS cache:
ipconfig /flushdns
Flushing the DNS cache can help when your internet is working, but a specific website or server is unreachable for some reason (e.g. a website times out and won’t load).
5. GETMAC
Every device that’s compliant with IEEE 802 standards has a unique MAC address (Media Access Control). MAC addresses are assigned by the manufacturer and are stored in the device’s hardware. Some people use MAC addresses to limit which devices can connect to the network.
Sample usage and output:

You may see more than one MAC address depending on how many network-related adapters are on your system. For example, Wi-Fi and Ethernet connections would have separate MAC addresses.
6. NSLOOKUP
nslookup stands for Name Server Lookup. It’s a nifty utility that’s packed with a lot of power, but most users don’t need all of that power. For regular folks like you and me, its main use is finding out the IP address behind a certain domain name.
Sample usage and output:

Note that certain domain names aren’t tied to a dedicated IP address, which means that you may get different IP addresses every time you run the command. This is normal for bigger websites because they spread their workload across many different machines.
If you want to convert an IP address into a domain name, just type it into your browser and see where it leads. Not all IP addresses lead to domain names though, and many IP addresses aren’t reachable over the web.
7. NETSTAT
netstat is a tool for network statistics, diagnostics, and analysis. It’s powerful and complex, but can be simple enough if you ignore the advanced aspects that you don’t need to know about (assuming you aren’t managing a massive business or campus network, for example).
Sample usage and output:

By default, the command shows all “active connections” on your system whether those connections are on LAN or across the internet. An active connection doesn’t mean data is being moved — it could just mean a port that’s open and ready to accept a connection.
Indeed, netstat is mostly useful to regular users for its ability to show port information, and that can come in handy when you need to forward ports.
But the command also has about a dozen switches that change what kind of information is displayed, such as the -r switch which shows a routing table instead.
8. NETSH
netsh stands for Network Shell. It’s a command that lets you view and configure pretty much every network adapter on your system, in more detail and granularity than any of the preceding commands.
Running the netsh command on its own will shift the Command Prompt into network shell mode. There are several different “contexts” within this shell, including one for routing-related commands, one for DHCP-related commands, and one for diagnostics, among others. But you can use it to run individual commands, too.
To see all network shell contexts:

And to see all commands within a context:

You can drill down one more layer to find all of the subcommands within those commands:

So for example, you can run this command to view all of the wireless network drivers on your system and their properties:
netsh wlan show drivers
It’s an advanced command that’s complex enough to deserve an entire article of its own. Just know that if you want to get real technical with your network configuration, you’ll probably need to use this command line utility.
Then again, everyone should have at least a little bit of Command Prompt experience. It can come in handy when you least expect it.
How comfortable are you with Command Prompt? Got any other networking tips that could prove useful for Windows users? Share with us down in the comments!
Subscribe to:
Posts (Atom)









