Tuesday, February 7, 2017

Windows 10 Won’t Boot? Try This!

Few computer issues are quite as frustrating as a PC that refuses to boot up. When your system can’t even initialize, it’s difficult to make any headway in locating the source of the problem.
Of course, there’s no reason to despair. Even if things look bleak for your PC, you can try plenty of fixes before it’s truly beyond repair. Windows 10 offers several methods of sorting out the boot process, and there are a few easy techniques you can carry out for yourself.
With any luck, this guide should help find the culprit behind your computer’s unwillingness to boot.

1. Check Your Battery

If you’re using a laptop, battery issues could well be the source of your system’s inability to boot properly. It’s worth testing an alternate charger cable to see whether that’s causing the problem. Confirm that the cable is working by trying it out on another laptop. Next, remove your system’s battery and plug the device into a power source.
Removing the battery will help you discover which component is faulty, if a hardware problem is to blame. The key here is to ensure that you’re only testing one element at any given time. If power issues are preventing your computer from booting up, it’s crucial that you know whether the battery, the charging cable, or another component needs to be replaced.

2. Boot to the Command Prompt Interface

When your computer can’t boot properly, it really can’t do much at all. However, it might still be possible to boot directly to the command prompt to expand its range of abilities. Using this interface, you can perform more troubleshooting procedures, and perhaps even fix your problem outright. You’ll need to have Windows 10 on a bootable disk or USB drive to carry out the procedure, so use another computer to set that up before you get started.
To boot to the command prompt, start up your system. While it’s initializing, watch out for details of a combination of keys that will allow you to enter the BIOS. This information is typically delivered alongside the vendor logo.
Navigate to the Boot tab and make either the USB or DVD drive the first bootable device. Your choice here will depend on where your copy of Windows 10 is located. Again, the specifics of this process may vary from one system to another, so consult the on-screen instructions. Next, insert the disk or drive bearing Windows 10 into your system, save your configuration, and restart your PC.
When prompted, use your keyboard to specify that you want to boot using the disk or drive. Enter the requested language, currency, and input preferences, then select Repair your computer on the next screen. Next, select Troubleshoot > Advanced Options > Command Prompt, you should then see a window to enter commands.

3. Use System Restore or Startup Repair

If you’re already booting Windows 10 from a disk or drive, it’s well worth utilizing a couple of utilities that are available as part of the process. Once you’ve booted from the drive as detailed above, you’ll get access to options that can get your PC back on track. Look out for links to System Restore and Startup Repair on the Advanced Options screen.
System Restore is a utility that allows you to return to a previous restore point when your computer was working normally. It can remedy boot problems that were caused by a change you made, rather than a hardware failure.
Startup Repair is a general-purpose troubleshooter for issues that prevent Windows from starting up. If you’re struggling to find the source of your boot issues, it’s a good idea to run the utility in case it can find a solution.

4. Reassign Your Drive Letter

A system with more than one drive installed can cause boot issues for Windows 10 users if their operating system (OS) volume has its drive letter unintentionally unassigned. However, you can fix this problem with a minimum of fuss by booting to the command prompt interface.
Boot to a command prompt window as explained above, then enter the following to run the disk partition utility:
diskpart
Once this is done, input list volume to print details of all the volumes currently hooked up to your system.
From here, you can use the select and assign letter commands to reassign the correct letter to an unassigned volume. For instance, if I wanted to assign the letter E to the Audio CD volume in the above image, I would first input “select volume 0” and then input “assign letter=E” to complete the process.
As ever, be very careful when making changes in the command prompt. Making mistakes here can quickly cause further problems from your PC.

5. Dodge the Windows 10 Bootloader

If you run into problems while trying to make a fresh installation of Windows 10, you may encounter the new version of the bootloader utility. This can sometimes interfere with attempts to reach an existing OS installation that’s present on another drive.
Fortunately, there’s a relatively straightforward way to remedy this situation. Boot to the command prompt interface and enter the following:
bcdedit /set {default} bootmenupolicy legacy
Restart your computer, and you should find that the legacy bootloader interface has replaced the Windows 10 iteration. You should have no further problems entering Safe Mode, or accessing your existing OS installation.

6. Try a Third-Party Utility

Figuring out what exactly is the cause of the problem is the most challenging part of remedying boot issues. When your system can’t even boot, it’s difficult to diagnose the problem. However, a third-party utility called Boot Repair Disk might have more success.
Boot Repair Disk is an open source rescue disk that you can use to automatically find and fix issues preventing your PC from booting up. It’s very easy to use — you only have to select whether you’re using a 32-bit or 64-bit version of Windows. The following testing procedure and any required fixes are carried out automatically, although there are options that allow for more close control.
When you’re at your wit’s end with boot issues, and you’re not sure what to try next, Boot Repair Disk is a useful option. It’s not guaranteed to fix your PC, but it may well be able to pinpoint a problem that was previously hidden away.
Do you have tips for users unable to boot Windows 10? Contribute a solution, ask for help, or simply join the conversation in the comments section below!.

No comments:

Post a Comment